Product classification
產品規格 | 單位 | HXYD520 | ||||||||
合模單元Clamping Unit |
| |||||||||
合模力Clamping force | kN | 5200 | ||||||||
移動模板行程Moving mould-plate stroke | mm | 780 | ||||||||
最大模厚 Max.Mould height | mm | 800 | ||||||||
最小模厚Min.Mould height | mm | 320 | ||||||||
拉桿有效間距 Space between tie-bars | mm | 820*770 | ||||||||
液壓頂出力Hydraulic ejector force | kN | 197 | ||||||||
液壓頂出行程 Hydraulic ejector stroke | mm | 200 | ||||||||
頂出點數Ejector number | n | 13 | ||||||||
注射單元Injection Unit | I1400 | I1600 | I2300 | |||||||
螺桿直徑Screw diameter | mm | 55 | 60 | 65 | 60 | 65 | 70 | 65 | 70 | 75 |
螺桿長徑比Screw L/D ratio | L/D | 21.8 | 20 | 20 | 21.6 | 20 | 20 | 21.5 | 20 | 20 |
理論注射容積Injection capacity in theory | cm3 | 665 | 791 | 929 | 791 | 929 | 1078 | 1128 | 1308 | 1502 |
注射重量Injection weight（ps） | g | 605 | 720 | 845 | 720 | 845 | 980 | 1027 | 1191 | 1367 |
注射壓力Injection pressure | MPa | 2142 | 1800 | 1534 | 2113 | 1800 | 1552 | 2088 | 1800 | 1568 |
注射速度Injection velocity | mm/s | 350 | 350 | 350 | ||||||
塑化能力 Plasticizing capacity | g/s | 60 | 75 | 90 | 75 | 90 | 105 | 90 | 105 | 120 |
螺桿轉速 Screw speed | rpm | 400 | 400 | 400 | ||||||
其他Other |
| |||||||||
油泵壓力Pump pressure | MPa | 17.5 | ||||||||
驅動功率 Motor/Driving power | kW | 45(注）+23（熔）+23+23（油） | 45(注）+30（熔）+23+23（油） | 37+37(注）+23（熔）+23+23（油） | ||||||
加熱功率 Heating capacity | KW | 28 | 28 | 30 | ||||||
外形尺寸 Machine dimension | m | 8.13*2.09*2.32 | 8.13*2.09*2.32 | 8.13*2.09*2.32 | ||||||
機器重量 Machine weight | t | 17.5 | 22.3 | 23 | ||||||
油箱容積 Oil tank capacity | L | 650 | ||||||||
您當前所在位置：首頁 < 
